220 Volt/50Hz AC Power Source - Step-Up Voltage & Frequency Converters 1500VA/1350W

Overview
This series is a double conversion Power Converter which produces stable pure sine wave voltage and frequency output (O/P). With this Converter, you can protect your equipment from most power issues, including power sags, power surges, brownouts, and line noise. With the common neutral topology, the converter provides internal connection from AC I/P neutral to AC O/P neutral; thus, it does not need to use an isolation transformer to provide 0 volt from AC I/P neutral to O/P neutral. This feature will reduce the interference to loads of communication or video systems.

Features

• Outstanding Performance & Reliability
• Common Neutral, Double Conversion Topology (0/P Neutral to 1/P Neutral is O volts normally)
• Wide Range Input Window and Input Power Factor Correction
• Low Noise, Smart Cooling Fan Design
• High Efficiency, New Full-bridge Inverter Design
• Automatic Restart After Overload Shutdown
• AC Input Generator Compatible
• Multifunction LCD Screen

SPECIFICATIONS

STEP-UP Voltage and Frequency Converter (UX / Tower Series)
Models	UX-1.5K
Output
Capacity	1500VA/1350W
Output Voltage	200V/220V/230V/240V Selectable
Voltage Waveform	Sine wave
Crest Factor	3:1
Output Frequency (sync to mains)	N/A
Output Frequency (not sync to mains)	50/60Hz (selectable from LCD function button) 50±0.01Hz or 60±0.01Hz
Regulation	±2% of selected output voltage (adjustable by using the setting software)
Output Current 200 V ~ 240 V	6.3 Amp
Output Peak Current (<250mS)	20 Amp
Overload protection	100%~129% for 60 seconds, then audible alarm; audible alarm sounds for 60 seconds before shutting down >130%, alarm will go off for 2 seconds and then shutting down
Harmonic Distortion	<3% (at full resistive load)
Efficiency	Up to 90%
Input
Voltage Range	100V~285Vac
Frequency Range	45~70Hz
Input current	15 Amp
Wall-Outlet Type Required	NEMA 5-20 R (20 Amps)
Power Factor	>=0.98
Surge Current	<100A, 3mS
Communications & Management
Control panel	LCD
Audible alarm	Overload alarm: Short-circuit alarm, Thermal alarm
Environmental and Safety
Operating Temp.	Up to 1500 meters: 0℃ to 40℃ (32℉ to 104℉)
Transit/storage Temp.	-15℃ to 55℃ (5℉ to 131℉)
Relative Humidity	5 - 95% non condensing
Operating Altitude	0 ~ 3000 meters
Audible noise	=<45 dBA (at 1 meter from surface of unit)
Safety Markings	BSMI
Quality control system	ISO9001
Physical
Models	UX-1.5K
Dimensions D x H x W	45×20×18cm 18×8×7in
Weight	7.0 kg / 15.5 lbs
Shipping Dimensions D x H x W; Weight	25 x 15 x 17 in; 22 lbs 64 x 38 x 43 cm; 10.00 kgs