Economy 120 Volt/60Hz AC Power Source - Step-Down Voltage & Frequency Converters 1350W / 12.6 Amp

Overview
This series is a double conversion Power Converter which produces stable pure sine wave voltage and frequency output (O/P). With the Converter, you can protect your equipment from most of the power problems, including power sags, power surges, and line noise, etc. With the common neutral topology, the Converter provides internal connection from AC I/P neutral to AC O/P neutral; thus, it does not need to use an isolation transformer to provide 0 volt from AC I/P neutral to O/P neutral. This feature will reduce the interference to loads of communication or video system.

Features

With outstanding performance & reliability, the unique benefits of the Converter include the following:

• Common Neutral, Double Conversion Topology
  (O/P Neutral to I/P Neutral is 0 volts normally)
• Input Power Factor correction
• Low Noise Smart Cooling Fan Design
• High Efficiency, New Full-bridge Inverter Design
• Full Function LCD Display
• Automatic Restart of Loads After Overload Shutdown
• AC Input Generator Compatible

SPECIFICATIONS

STEP-DOWN Voltage and Frequency Converter (EX Series)
Model	12060EX-12
Output
Capacity	1500VA/1350W
Output Voltage	100V/110V/115V/120V Selectable
Output Current-Amps @ 60Hz	12.6 Amp
OUTPUT PEAK CURRENT (<250mS)	38 Amp
Voltage Regulation	±2% of selected output voltage
Output Frequency (sync to mains)	N/A
Output Frequency (not sync to mains)	50/60Hz (selectable from LCD function button) 50±0.01Hz or 60±0.01Hz
Crest Factor	3:1
Voltage Waveform	Sine Wave
Output Distortion (Resistive Load)	<2%
Output Distortion (Reactive Load)	<3%
Non-Linear Peak Current for 30 sec.	27A
Standby Power	18W
Total Harmonic Distortion	<3% (at full resistive load)
Output EMI Filter	N/A
Output RFI Filter	30Mhz - 1000Mhz
Clamp Level	200V PEAK
Protection
Over load Protection	100%~129% for 60 seconds delay, then alarm ; alarm for 60 seconds, then shutdown o/p; > 130%, alarm for 2 seconds, then shutdown o/p;
4A	Output protected from short circuit by pulsating type Auto-Restart time: 30 seconds
Input
Voltage Range	180V~285Vac
Maximum Continuous Load	1350W
Maximum Peak Load	1800W
Input Current	9 Amp
Input Frequency Range	45Hz ~ 70Hz
Phase	Single
Noise Filtering	Full-Time EMI/RFI Filtering
Input EMI Filter	150Khz -30Mhz (class A)
Input RFI Filter	30Mhz - 1000Mhz (class A)
Over Current Protection	By Re-Settable Over Current Protector
Voltage Range	180 V ~ 285 Vac
Power Factor	≧0.98
Audible Alarm	Over load alarm, Short-circuit alarm, Thermal alarm
Inrush Surge Capacity	<100A, 3mS
Voltage Interruption Ride Through	10mS
Efficiency
Efficiency	>89%
Output Connection from Mains
Ground	Input and Output Ground Connected
Neutral	Input and Output Neutral Connected (after EMC inductor ) Isolation Transformer is not required
Indicators
LCD Control Panel	Displays Input Voltage, Output Voltage, Output Frequency, Temperature, Load Level Selectable Output Voltage and Output Frequency
LED	N/A
Output Compatibility
Output Compatibility with UPS	Yes
Environmental and Safety
Operating Temp.	Up to 1500 meters: 0℃ to 40℃ (32℉ to 104℉)
Transit/storage Temp.	-15℃ to 55℃ (5℉ to 131℉)
Relative Humidity	5 – 95% Non-Condensing
Operating Altitude	0 ~ 3000 Meters
Moisture Sensitivity	Internal Fan
Audible Noise	≦45 dBA (at 1 meter from surface of unit)
Cooling
Natural Ventilation
External Cooling Fan Control	Forced air cooling by internal fan
Physical
Dimensions W×D×H	45 × 20× 18 cm 17.71 x 7.87 x 7.08 in
Weight Net/Gross	7.0 kg 15.43 lbs
Shipping Dimension; Weight	25 x 15 x 17 in; 24 lbs 64 x 38 x 43 cm; 10.90 kgs
Others
Standard Accessories	Input Power Cords, Type F, Type G, Type I, Type M.
Wall Mountable	No
Warranty	2 Years, Full Replacement
Quality Control Standard	ISO9001
Approvals and Safety Markings	CE